How to Clean Intake Manifold

If you are wondering how to clean intake manifold (IAC) filter, then you have reached the right place. Maintaining your intake manifold is very important. Improperly maintained intake manifold can lead to a lot of pollution inside the engine. IAC filters should be cleaned from time to time and it is not a difficult task. You will be able to clean your intake manifold if you follow these simple steps.

The first thing that you need to do is to open the hood of your car. Then, you need to locate the carburetor. You need to look for the port (a small hole). Once you have located it, you should turn the crank clockwise. This will make the intake manifold cleaner as it spins.

Next step in cleaning the intake manifold is to use a piece of cloth or paper. Once you have put the cloth on the intake valve, you need to wipe it down carefully. The reason behind this is the fact that there may be some oil trapped in the crankcase. Hence, wiping the oil off can help you get rid of the trapped oil.

The next step is to look for the filter and its removal. Once you have removed the filter, you need to clean the inside. Nowadays, most of the cars come with plastic filter. You can use the same procedure. Then, you need to look for the areas where you can put the new filter. Clean the areas with the help of the dry rag or paper.

After cleaning the intake manifold, it is time to check it for any remaining dirt. Put back the cap and run your engine for a few seconds. If you car runs well, then you can replace the cap. If not, go on with the cleaning process.

You can see that all the steps are quite simple and easy. If you follow it properly, there will be no problem in your intake manifold functioning. It is always better to use a professional mechanic for this task. This is because they will know the exact method of cleaning that suits your engine. Hence, your car will be running in its best condition always.

How to clean the intake manifold is one important task that cannot be ignored. This is because the dirty intake manifold can affect your engine in a bad manner. The intake tube carries fresh air into the engine. Hence, if it is clogged, the fresh air will not get into the engine. This will affect the working of the engine seriously.

How to clean the intake manifold is not at all difficult. However, you must have some basic knowledge in the field. This is because proper cleaning of the intake manifold requires you to know the process as well as the complete process. The information given below will guide you in this regard.

The very first step is to open the hood of the car. You can remove the black key near the firewall. The engine blocks must be removed carefully. The transmission can also be cleaned from inside and outside, as required by the manufacturer.