How to Replace Shocks on a Motorcycle

Are you looking for the answers to your questions on how to replace shocks on your motorcycle? You have come to the right place. Replacing your bike’s shocks is something that you may think is a complex process, but in actual fact it is not. In fact, all it takes is some basic know how and a little time to change out those shocks for a whole new look. Let me share with you what you need to know in order to change out those shocks and get you on the road in no time.

The first thing that you need to know when learning how to replace shocks on your motorcycle is the type of shocks that are currently on your bike. Many motorcycle shocks are made with two springs, while others are made with three or four springs. If you are unsure as to which type you have you can simply ask your dealer or the person who sold you the bike what type of shock you currently have.

Once you know the specific type of shock that you currently have you can start your quest on how to replace shocks on your motorcycle. Next, you need to find out the size of shocks that you currently have. There are many different sizes ranging from the smallest shock available all the way up to a full suspension bike. Next, you will need to know the height of your bike. This is very important because you want to make sure that you get the correct height.

Once you have all of these things you need to learn how to replace shocks on your bike. Begin by removing the sprocket and the tire from the bike. Once you have the shock removed you will notice that the inner part of the shock is called the ball joint. This is where the spring lies, and if it is not straightened out it will not work properly.

The next step on how to replace shocks is to find the spring. Once you have the spring and the ball joint in place, you need to measure the distance between them. This is very important because you need to make sure that your new springs will fit into the old hole. You will find that most companies will allow you to re-size the springs once you have the old one replaced, but this is not always the case. You can also ask to have both parts re-sized if needed.

The last thing that you will have to know when learning how to replace shocks on a motorcycle is how to put them back on once the old ones are worn out. One of the things that you have to do to get the ball joints and springs in place is to use some oil. This will help to keep the parts stuck better, and it will also give them a small bit of extra life. When you take these things into consideration, you will notice that learning how to replace shocks is not that difficult at all.