This site contains affiliate links for which I may be compensated
When you hear that strange noise in your vehicle, chances are it means one thing – your transmission fluid needs to be changed. This is very important to the performance of your car, so it should be done immediately. Not only will you experience more speed, but you will also find that your engine starts up and operates much smoother than before. Another benefit when changing your fluid is that you will experience much better fuel mileage, too. It is quite possible that your vehicle could even last longer without having to change the transmission fluid.
However, changing fluid is not always easy. There are many factors that should be considered when you think about when to change transmission fluid. The first thing you need to determine is if your car needs fluid installation or transmission only. If the car needs fluid only, then you can simply take out the old fluid and place it in the new one. Remember that you should only do this when it is recommended by the owner of your car.
The next thing you need to consider when to change transmission fluid is if your car needs a complete change or if you can just replace a section. Sometimes it is necessary to replace just the transmission fluid and clean the system so that it will be free of any debris or rust. To do this, you need to locate the fluid reservoir, and then turn off the engine and remove the oil filter. Then, you need to locate your fluid hose and pull it out as far as it will go, according to the instructions on the fluid reservoir. You will then need to locate the fluid reservoir pump and remove it from the engine.
Once you have located your fluid hose and your fluid reservoir, you should close off the fuel line until you are positive that everything is all right. Next, you should disconnect the battery cables and drain the fluid. Now, you can begin to locate the components of your engine, beginning with the oil filter. You need to look for any black marks on the filter, which means that you need to clean it before replacing it. When you are done cleaning the filter, it is time to replace it.
You need to remove the drain plug under your vehicle and place the new fluid reservoir on it. You should also install the drain plug. The process is basically the same as you did with the first fluid, just that you are replacing it with a new one. You should also note that when to change transmission fluid should never occur without changing the oil in your vehicle. You may not notice this when you are driving, but it is important that you are aware of it, as it could cause damage to your engine.
As mentioned before, you should only perform this task when it has been recommended by someone who knows what they are doing. This may mean that you are going to have to take your car in for service, or it may mean that you are going to have to pay to have someone do it for you. However, it is important that you know what you are doing so that you do not hurt yourself while trying to do something that you may know nothing about. The process is relatively easy when you have a mechanic that knows what they are doing, but there are those times when you simply do not know how to do this, and that is when you need to change the transmission fluid. Once you understand the process, it should not be difficult to change your own fluid.